FT43 ball float steam trap
Product: FT44 ball float steam trap Pressure Rating: 1.6-4.0Mpa Specification: DN25 Material: cast steel Standard flanges: DIN, ANSI, JIS, JB79
Details
Product:FT44 Ball Float Steam Trap.
Pressure Rating:1.6-4.0Mpa
Specification:DN25
Material:cast steel
Standard flanges:DIN,ANSI,JIS,JB79
Structural characteristic of FT44 ball float steam trap
1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable close down and long life.
2.There's always condensate water available in front of the valve with reliable water sealing and non-leakage of steam.
3.No noise before operation in favor of environmental protection.
4.At the beginning of ventilation,all the valves start and low temperature condensate water and air are rapidly expelled to greatly shorten the start time for equipment.
5.Internal component is made of stainless steel, corrosion and cavitation erosion proof.
main technical parameters and indexes of performance
Nominal pressure PN16
Maximun design pressure(PMA) 16bar g
Maximun design temperature(TMA) 300
Minimun design temperature(TMI) -10
Maximun upstream pressure for saturated steam service(PMO) 13bar g
Maximun operating temperature(TMO) 300
Minimun operating temperature(TMIO) 0
Maximun differential pressure( PMX ) FT43-4.5 4.5bar
FT43 -10 10bar
FT43 -14 14bar
Maximum cold hydraulic test pressure 24bar g
material of main component
Name of component Material of component
Valve body, valve cover WCB
Floating ball stainless steel
connecting dimension
DN A
25 160
Product: FT44 ball float steam trap Pressure Rating: 1.6-4.0Mpa Specification: DN25 Material: cast steel Standard flanges: DIN, ANSI, JIS, JB79
Details
Product:FT44 Ball Float Steam Trap.
Pressure Rating:1.6-4.0Mpa
Specification:DN25
Material:cast steel
Standard flanges:DIN,ANSI,JIS,JB79
Structural characteristic of FT44 ball float steam trap
1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable close down and long life.
2.There's always condensate water available in front of the valve with reliable water sealing and non-leakage of steam.
3.No noise before operation in favor of environmental protection.
4.At the beginning of ventilation,all the valves start and low temperature condensate water and air are rapidly expelled to greatly shorten the start time for equipment.
5.Internal component is made of stainless steel, corrosion and cavitation erosion proof.
main technical parameters and indexes of performance
Nominal pressure PN16
Maximun design pressure(PMA) 16bar g
Maximun design temperature(TMA) 300
Minimun design temperature(TMI) -10
Maximun upstream pressure for saturated steam service(PMO) 13bar g
Maximun operating temperature(TMO) 300
Minimun operating temperature(TMIO) 0
Maximun differential pressure( PMX ) FT43-4.5 4.5bar
FT43 -10 10bar
FT43 -14 14bar
Maximum cold hydraulic test pressure 24bar g
material of main component
Name of component Material of component
Valve body, valve cover WCB
Floating ball stainless steel
connecting dimension
DN A
25 160